Central Air Conditioning Maintenance

Central air conditioning maintenance is a key step in insuring that your new air conditioner last for at least a dozen years. But that won’t happen without the necessary maintenance for A/C units to run efficiently. Several tricks will help heating, ventilating and air conditioning (HVAC) units perform at optimal levels.

Probably the best way to get the best performance from the units is to enlist the services of a professional. An HVAC Service La Vergne TN contractor accustomed to such inspections will have no trouble tuning up your unit. The result? Whether warm or cool outside, you can count on your HVAC to function optimally.

Want central air conditioning that runs smoothly? Then, check that the unit drains as it should and doesn’t leak. If excessive amounts of water stay in the system or escape from it, the unit strains to function. Read the additional maintenance tips that follow.

• Examine hose connections for cracks.

• Find out if the condensate tube drains properly.

• Change the filter every four to six weeks.

• Clean off the outside air compressor.

• Keep space around the compressor clear.

• Have ductwork professionally cleaned every three to four years.

Give Your Unit Relief

Fans support air conditioners by circulating cool air. Whole house fans particularly excel at this. Using a fan isn’t the only way to relieve the strain placed on air conditioners, however. Below is a list of tips for cooling your home.

• Move everything away from vents so that air flows freely to a larger volume of area.

•Ventilate your attic.

• Pull the shades and blinds on the sides of the house that get the most sun.

• Run dishwashers and dryers in the evenings or early mornings, as these heat-emitting appliances raise thermostats.

Central Heating Maintenance

Taking a few simple steps will help your central heating unit run as efficiently as possible. For one, test your heater before the first frost to see if it runs. Contact a professional if no warm air travels through the vents.

If you have a natural gas system, check the pilot light. The flame should be clear blue. A yellow or orange flame could signal trouble. Also, be sure to change your furnace filters annually. Dirty filters strain the system, which may cause breakdowns. Lastly, as you would with air conditioning, clear the area around the vents.

Leave a Reply

Your email address will not be published. Required fields are marked *